FOUR CONFIGURATIONS · ONE PRODUCT PLATFORM
Start with the mounting form and listed power
The comparison includes one 7kW wall-mounted order record and three floor-standing records at 20, 30 and 40kW. Each lists a single connector and a 5m charging cable.
Compare all four order options
The complete white enclosure, control panel, output cable coil, connector and supply tail shown here belong to the illustrated 7kW platform. Selecting another order option does not relabel this fixed illustration as its photograph.
Compare four order configurations
All four records list a 5m cable and one connector. The 7kW wall-mounted record and 20–40kW floor-standing records remain separate choices.
4 configurations
No matching configuration. Reset the filters to view all records.
| Option | Listed power | Cable length | Connector arrangement | Mounting | Select a version |
|---|---|---|---|---|---|
| DC23-01 | 7kW | 5m | Single connector | Wall-mounted | |
| DC23-02 | 20kW | 5m | Single connector | Floor-standing | |
| DC23-03 | 30kW | 5m | Single connector | Floor-standing | |
| DC23-04 | 40kW | 5m | Single connector | Floor-standing |
Keep order details and the illustration separate
All four order records list a 5m cable. The illustrated specification sheet lists 4.5m. Confirm the cable supplied with the selected version; these entries have not been merged.
The 7kW order record says wall-mounted. The printed model line says post-mounted 7KW single-connector charger, while the main source artwork mentions wall-mount / pedestal. Confirm the mounting drawing for the selected version.
Input/output voltage, single-phase 32A connection, efficiency and dimensions below belong to the illustrated sheet. They are not assigned to all four order records; request the selected version’s electrical drawing and instructions.
Read the illustrated 7kW unit’s specifications
The complete 23-row sheet is shown below, with the original values also set in page text for easy reading. These printed specifications describe the illustration; they do not supply missing parameters for every order option.
| Product model | Post-mounted 7KW single-connector charger |
|---|---|
| Output power | 7KW |
| Input voltage | 85-265VA.C:220VA.C(TYPE) |
| Input frequency | 47-63HZ,50HZ(TYPE) |
| Output voltage | 50-750VD.C. |
| Rated output current | 0~20A |
| Power factor | 0.99 (full load) |
| Peak efficiency | 95% |
| Power connection | Single-phase 32A dedicated supply |
| Quick controls | One-button start / Card start / Scheduled start |
| Protection design | Overvoltage, undervoltage, overload, short circuit, earthing, overtemperature, low temperature and lightning protection |
| Communication interface | CAN communication |
| Noise | Less than 60DB |
| Cooling | Forced air cooling |
| IP rating | IP54 protection rating |
| Operating temperature | -40°C~+75°C; derate above 55°C |
| Relative humidity | 5%-95% |
| Altitude | 2000M |
| Atmospheric pressure | 70~106KPA |
| Operating environment | Indoors or outdoors |
| Cabinet dimensions | 126*490*340MM |
| Charging cable length | 4.5m |
| Input cable length | 1m |
Dimensions are measured manually; deviations may occur.
Request a clearly identified version
- Choose the option’s listed power and mounting form.
- Request the actual connector, electrical supply and installation documents for that version.
- Confirm the required cable length against the 5m order record and 4.5m illustrated entry.
- Agree the sample contents, operating instructions and packing list.
The 7kW image and its printed single-phase 32A connection, controls and dimensions are not a photograph or engineering confirmation of the 20, 30 or 40kW floor-standing versions. Keep the selected model’s documentation with your request.
No configuration selected.